Follow

Setting up SmartSensor

1. SmartSensor receives signals from any of your IR remote controls and as such recognizes when
you are interacting with your Audio Visual (AV) components.

2. The SmartSensor comes already programmed with a 60 minute default setting. This setting can
be changed according to your needs, ranging from 1 to 2 hours, or MusicMode.

To set to 1 hour: Press the button on the SmartSensor slowly and deliberately once (one second),
then release. The LED will flash 1 time indicating that it has accepted the 2 hour setting.

To set to 2 hours: Press the button on the SmartSensor slowly and deliberately twice (one second
each), then release. The LED will flash 2 times indicating that it has accepted the 2 hour setting.

To set to MusicMode™: Press the button on the SmartSensor slowly and deliberately three
times (one second each), then release. The LED will flash 3 times indicating that MusicMode™ is
active.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk